Audio-Technica AT33MONO

$299.00


Description

The AT33MONO is designed specifically for use with mono vinyl records.* Due to the horizontal configuration of its PCOCC (Pure Copper by Ohno Continuous Casting) voice coils, the AT33MONO cartridge only generates electrical signal with horizontal movement, yet it also has appropriate compliance in the vertical direction, making it safe for use with stereo records. The cartridge’s 0.65 mil conical stylus is mounted on a hard duralumin cantilever for excellent sound reproduction and dependable performance. Because the AT33MONO does not easily pick up unnecessary strain components from distorted or scratched records, it produces mono audio of a much higher quality than that generated by a stereo cartridge. The cartridge features a strong, rigid body and incorporates Hanenite rubber in the interior and cantilever fulcrum support to eliminate unnecessary vibrations.

* This cartridge with 0.6 mil conical stylus is not compatible with SP (standard play) shellac records. It is designed to play microgroove 33-1/3 and 45 RPM vinyl records.

Frequency Response 20-20,000 Hz
Vertical Tracking Angle 23°
Vertical Tracking Force 2.3-2.7 g (2.5 g standard)
Recommended Load Impedance More than 100 ohms (when head amplifier is connected)
Coil Impedance 10 ohms (1 kHz)
DC Resistance 10 ohms
Coil Inductance 28 µH (1 kHz)
Output 0.35 mV (at 1 kHz, 5 cm/sec)
Stylus Shape 0.65 mil conical
Stylus Type Nude square shank
Cantilever Duralumin pipe
Static Compliance 20 x 10-6 cm/dyne
Dynamic Compliance 6 x 10-6 cm/dyne (100 Hz)
Mount Half-inch
Weight 6.9 g (0.24 oz)
Dimensions 16.0 mm (0.63″) H × 16.6 mm (0.65″) W × 26.5 mm (1.04″) D
Accessories Included Non-magnetic screwdriver; 2 washers; 2 nuts; cartridge installation screws (13 mm × 2, 19 mm × 2); plastic protector; brush; PCOCC lead wire set

 


Note: Moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.

Read More
SKU AT33MN1923
Categories